How to change led interior light bulb in 2007 Chevy Silverado

Leave a comment
Replace Electronics
How to change led interior light bulb in 2007 Chevy Silverado

I am going to change out the interior lights of my 2007 Chevy Silverado and we’re play soon with some ice blue LEDs.

The first thing I do was turn the interior lights off by pressing the interior light button which is on the left side of the steering wheel. That will keep the lights off while the doors are open.

Take the frontier lights out, take little notches four of them with a flat tip screwdriver. It is easy to pull the bulb straight out, pop the LED in and press the button to make sure they are working. Put the faceplate back on these is what I found dude just put the two notches in front abundance at first press up and then just pop it in.

So to change out the back interior light we’re gonna add two notches. On the passenger side, we’d also have a huge in the back, so take two carefully pump out the first match by the button a couple rude by about the second notch do that or at least a faceplate and then pull the hinge out. Take the bulb back out place it with whatever bulb you want to go back in.

You can kind of move them around just a little bit give them a different angle. When you’re ready to put the fixture back in, I do is come up here put the notch in. First, on the passenger side, make sure the faceplate is facing straight down then slide the hinge. And then pop your two notches back in on the passenger side and that should take care of your interior lights in the Moodle or on the back.

Remember to come back and turn your interior lights back on. So I’m that one guy for maybe seven and this is how I changed out the interior lights of my 2007 Chevy Silverado.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *