Today I am going to show you the installation guide of 2007 to 2013 Chevy Silverado projector headlights installation. The steps are as follow, let’s start by opening the hood.
Remove the plastic fasteners on the radiator cover
Remove the radiator cover and put it aside, remove the bolts that securing the grill
Release for your taters behind the grill, remove the grill from the vehicle
Loosen the bolt under the headlight access it from the wheel well liner, remove two bolts that securing the headlight
Unseat the headlight and disconnect the harness, locate the side marker or parking light wires
Use quick connector to splice the red wire to positive wire, use another quick connector to splice the black wire to ground wire
Connect the main harness to the new projector headlight, seek the new bi xenon headlight to its position
Reinstall two bolts on top to secure the headlight, tighten the bolt under the headlight access it from the wheel well liner, reinstall the grill to its position
Align the top of grille and fasten the four retainers to the vehicle body, reinstall the bolts to secure the grille
Reinstall the radiator cover and the plastic fasteners, close the hood
Now that the new installation is completed. Before you take your vehicle on the road, you should check the light work properly, the lighting is in good situation.
All the hid projector headlights for 07-13 2th Gen Chevy Silverado mentioned above can be found on the link below: