How to Replace the Ignition Switch on the 1th Gen Chevy Silverado Truck?

Leave a comment
Replace Electronics

How do you replace the ignition switch assembly on a 1st Gen Chevy Silverado truck? Replace the Ignition Switch on truck No matter what you do, the key won’t turn properly, and you might end up breaking it if you apply too much anger power. Once your new lock is in place and working properly, you can go about putting everything back the same. Once lined up, slide the lock into place. Yes, it’s a very frustrating job, and yes, you can take the easier route, replace 1th Gen 1500 Chevy truck ignition switch just buy a lock and replace old one with a new one without fangling about. Whatever the choice, just remember, this is the best way to keep your old key and also have some locksmithy fun too.

 

Steps to Replace the Ignition Switch

First, insert your key, it should fit in smoothly and turn easily. Then Insert in the switch on the dowel and screw in the grub screw. Check what is the name of the switch that releases the key from the ignition lock on the Chevy Silverado and the switch clicks when you put the truck in park. Please ensure the key is inserted and is set to position I. Test if the locking notch on top of the ignition lock can be pressed in until it is level with the outer shape of the lock.

How to Replace the Ignition Switch on the 1th Gen Chevy Silverado Truck?

You may bench test the parts to ensure that everything is working properly. If the ignition switch on a Neon is failing, your car may stall or not start. The ignition switch can wear which can cause malfunction (e.g. no starter). The ignition switch used in the Chevy Siverado is like the rest of the steering column from GM Auto. To remove/insert the ignition lock and/or switch ensure the key is inserted and is set to position I (key vertical and position where normally the radio is on but ignition is still off).

How to Replace the Ignition Switch on the 1th Gen Chevy Silverado Truck?

The final step, remove the Sentry Key Immobilizer Module (SKIM) from the top of the steering column using a ratchet and socket. Remove the tilt lever from the steering column using a Phillips screwdriver. If this has the locking tilt wheel it is better to find a salvage yard and get the entire steering assembly. If you don’t want to get stranded somewhere or be unable to go where you need to go, then make sure you take care of this problem early.

If have any questions regarding how to replace the Ignition Switch on the 1th Gen Chevy Silverado, then you can email us on our own site led-car-light-manufacturer.com, Chevy Silverado upgrade packages are available now, including car headlights, 194 led bulbs for car interior lights, and 20% off at this week, save money back, don’t miss the best time to buy.

Leave a Reply

Your email address will not be published.