How to Install a Fog Light in 2007-2014 Chevy Silverado

Leave a comment
Replace Electronics
How to install a fog light in 2007-2014 Chevy Silverado

Today I’m going to be teaching you how to install this iJDMTOY LED fog light kit on your 2007 to 2014 Chevrolet Silverado. Let’s start step by step:

How to install a fog light in 2007-2014 Chevy Silverado

– The first thing you’re going to do is take off the OEM fog lights and place it to the side

– Now grab your pod light with the included metal u bracket and screws

– You’re first going to squeeze the ends of the brackets to insert it into the first inner layer of the LED pod lights for a snug fit

– Take a small bolt and drop it into the inner side of the light then use a screwdriver to press down on the bolt, so it doesn’t move around when you tighten the screw and pull it together

– Now that you have the u brackets installed take the metal mounting brackets

– And we’re going to mount them LED pod lights to the bracket take the included screw and put it through the u bracket like this using the outside grooves, put the screw and tighten it with the nuts and do the same with the other side

– Pull the wires to the bracket and put the mounting bracket through the OEM vessels screw in the bracket to the OEM vessels

– And there you have it, you’re all set and ready to go with your new LED fog lights

How to install a fog light in 2007-2014 Chevy Silverado

When all things are done, you can install the new fog light into your vehicle. But before you drive your car on road, you should check the light whether they work or not. And check all the wires, make sure they connect together.

If you want to get these OME led fog lamp for your 2007-2014 Chevy Silverado, here the link:

https://www.led-car-light-manufacturer.com/car-led-fog-light-bulbs/

Leave a Reply

Your email address will not be published.